The honeycomb inclined tube packing is welded and installed into the sedimentation tank to discharge water in time. The honeycomb inclined tube packing is installed in the equipment and the water is not discharged into the equipment for a long time. The sun exposure directly causes the honeycomb inclined tube packing to age, fragile, chip off and break. Make the honeycomb inclined tube filler unusable. The damage caused is very large.
The honeycomb inclined tube packing itself is not afraid of blisters and corrosion resistance. After the honeycomb inclined tube packing is welded, it should be put into the sedimentation tank and filled with water. This can greatly increase the service life of the honeycomb inclined tube packing.
Since the specific gravity of the inclined tube packing is 0.92 slightly smaller than that of water, after the inclined tube packing is assembled in place in the pool, 10mm round steel must be pulled from left to right above the packing for reinforcement (two round steels are required to pass through the upper part of each unit packing) , Both ends of the round steel are reliably fixed on the wall of the sedimentation tank. After the installation of the round steel, it can well prevent the inclined pipe filler from loosening and floating during the initial use. The round steel adopts epoxy coal tar anticorrosion.
Operation and debugging of inclined tube sedimentation tank
(1) Check whether the water inflow is even, and shall not impact the sedimentation tank and affect the sedimentation effect;
(2) Adjust the height and level of the water outlet weir trough to the appropriate level to keep the water outlet uniform;
(3) After the above construction process, the installation of the filler for the inclined pipe sedimentation tank has been completed. After normal operation, the sludge discharge cycle needs to be determined according to the concentration of suspended solids in the incoming water, and attention should be paid to timely discharge of sludge to ensure that the inclined tube sedimentation tank always maintains good operating conditions and satisfactory effluent quality.