Inclined plate clarifier
Honeycomb inclined plate clarifier is a kind of sedimentation tank packing designed and developed on the basis of the theory of "shallow sedimentation". The packing has large wet cycle, small hydraulic radius, good laminar flow state during operation, and the particle sedimentation is not disturbed by turbulent flow. It can accelerate the separation of particles from water and shorten the sedimentation distance of particles.
inclined plate clarifier for water purification and chemical wastewater, water plant, sewage plant, coal mine water treatment, water treatment, power plant, coal preparation concentrate, tailings pool water treatment, pharmaceutical factory, dyeing factory, washing plant, chemical plant, paper mill wastewater treatment desanding and rapid precipitation oil separation, separation and enrichment of tailings thereof, especially for water treatment works and wastewater treatment engineering of transformation efficiency is better.
1.Product features
This product is made of ethylene-propylene copolymer grade plastic and is made by infrared constant temperature and hot pressing. It is accurate in size, large specific surface area, safe and non-toxic, corrosion resistant, aging resistant, smooth wall surface and easy to wash.
1. Large wet cycle and small hydraulic radius.
2. The laminar flow state is good, and the particle settlement is not disturbed by the contract flow.
3. When the length of the inclined pipe is 1 meter, the VO is controlled in the range of 2.5-3.0 mm/s, and the effluent water quality is the best.
4. Use honeycomb inclined pipe at the water intake. When the pipe length is 2.0~3.0 meters, it can safely operate the external management in the high turbidity of 50-100 kg/m 3 mud and sand content.
5. The treatment capacity of the inclined tube sedimentation tank is 3-5 times that of the flat flow sedimentation tank, and 2-3 times that of the accelerated clarification tank and the impulse clarification tank.
2.U Straight pipe features
1, the treatment efficiency is higher than the active sludge method, the general hydraulic load is 100-200 meters 3/ meter 2· day, the organic load is 2000-5000 grams/meter 3, so it reduces the floor area.
2, the aeration intensity is lower than the activated sludge method, and does not need sludge backflow, so it can reduce power consumption and simplify management.
3, less sludge, reduce the sludge dewatering and other post-treatment workload.
4, the generated sludge settling is good, is conducive to the removal of suspended matter in the latter section.
5, strong adaptability, can adapt to a large range of different water quality, water quality, water mutation impact load tolerance is strong, maintain stable treatment effect.
3.Scope of application
Inclined plate clarifier are mainly used for various sedimentation and sanding operations. It is the most widely used in water supply and drainage engineering in recent ten years and has become a water treatment device. It is suitable for a wide range, high processing effect, small footprint and other advantages. It is suitable for sand removal at inlet, general industrial and domestic water supply precipitation, sewage precipitation, oil isolation and tail tensification, etc. It is suitable for new construction projects and renovation of existing old ponds, and can achieve good economicbenefits.
The straight pipe is mainly used for the biochemical treatment of industrial organic wastewater and urban sewage in high-load biological filter, tower biological filter, submerged biological filter (also known as contact oxidation tank) and microbial carrier of biological rotary table.
