Inclined Tube Lamella Settler /clarifier Sedimentation Tank Equipment

Function & application

The gear adopts ethylene-propylene copolymer, fiberglass or polyvinyl chloride honeycomb inclined tube with inclination perspective of 60 ℃, slant size of 1 m and internal tangent diameter of 35-50mm. The internal tangent diameter can be modified in accordance to the water excellent to attain the nice precipitation effect. Our manufacturing facility can graph and system the inclined tube precipitator in accordance to the person request or the authentic waste water take a look at data, when uses, ought to add the coagulant generally.

It is appropriate for enhancing consuming water great and small sewage initiatives in rural areas, villages and towns, farms, navy barracks, small and medium corporations and institutions.

It is extensively used in the purification of industrial wastewater, home wastewater, non-ferrous metallic processing wastewater, stone wastewater, mine wastewater, biochemical water and a range of excessive suspended depend wastewater. 

Assembly method of Aquasust UV Tube Settler

Aquasust UV tube setter is assembled with 5 corrugated sheets and 5 wave sheets into a 1 foot wide (305 mm) module. The length of the sheet determines the length of the assembled product, and Juntek offers 6ft (1829mm), 8ft (2438mm), 10ft (3048mm) and 12ft (3658mm) increments. The assembly of extruded tube counters requires the use of mortise and tenon joints to slide the individual profiles together. Typically, these tube sinkers are assembled into 3'-3" wide x 3'-3" long (1 m x 1 m) modules. The shape and size of the profile will determine the number of profiles required to make an extruded tube sinker module. Typically, a module of this size will require approximately 100 individual profiles. Based on the number of profiles required for a 1 m2 extruded precipitator module (approximately 100), compared to the number of sheets required for a similarly sized Aquasust thermoformed module (10), it is reasonable to estimate that the assembly rate and labor cost to assemble an extruded precipitator is more than 10 times that of a thermoformed precipitator.

In addition to the assembly rate, another significant difference of the extruded tube sinker is the absence of wave plates (or flat plates). The wave plate within the thermoforming sinker module provides beam strength that is not available in the extrusion sinker. The benefit of the increased beam strength is that the Aquasust UV Sinker can span 8 feet (2,438 mm) unsupported and still maintain its structural integrity, resulting in minimal support required for the entire installation. Due to the weaknesses in the design of extruded tube counters, they will require a stronger and more complex support system, which brings with it higher material and installation costs.

Hot Tags: inclined tube lamella settler /clarifier sedimentation tank equipment, China, suppliers, manufacturers, factory, cheap, in stock, free sample, Lamella Plate Media