Screw Press For Water Treatment

Easy installation Screw Press Type Sludge Dewatering Equipment for Sale

Sludge dewatering screw filter press for industrial wastewater cure plant developed with the aid of AquaSust makes use of the dewatering principles of force-water homo-direction, thin-layer dewatering, suitable stress and extension of the sludge dewatering path. The new equipment, greater superior than the common dewatering tools which are effortlessly blocked, unsuitable for low-concentrated sludge and oily sludge, of excessive consumption and challenging to operate, properly take away these troubles and are of greater effectivity and strength saving.

Main Features

1.Exclusive pre-thickening machine permits a broad strong attention ranging from 3000mg/l to 50000mg/l
2.Fixed and transferring plates exchange filter cloth, self-cleaning, clog-free, convenient to deal with oily sludge
3.Low going for walks speed, low noise, low energy consumption, 1 /8 of Belt Press and 1 /20 of centrifuge
4.Less capital building cost, greater incredible working performance
5.Fully automated control, Easy operation and easy upkeep

BoxController

Applicable sludge attention of 2000mg/L-50000mg/L.Most in particular for the oily sludge.Fully Automatic Control Combining with the auto manipulate system, the computer runs very safely and truely and can be programmed according to the requirement of the users. It can function routinely for 24 hours, unmanned.

Low Running Cost
Power-use: much less than 5% of centrifuge.
Water-use: much less than 0.1% of belt filter press. Polymer: saving round 60%.
Room: saving extra than 60% of the funding for dehydration room.
Non-clogging
Self-cleaning with small quantity of water.
Suit for Oily Sludge

Low Running Cost
Power-use: much less than 5% of centrifuge.
Water-use: much less than 0.1% of belt filter press. Polymer: saving round 60%.
Room: saving extra than 60% of the funding for dehydration room.

Non-clogging
Self-cleaning with small quantity of water.
Suit for Oily Sludge

No secondary air pollution
The screw shaft rotational velocity about 2~3r/min, no vibration and noise is very small .
Only want a small quantity of water for self-cleaning, no secondary water pollution.
Sludge runs at a sluggish working condition. The scent does now not spread.

●Sludge pump, dosing pump selection reference:

Processing capacity Sludge concentration

300[kg-DS/h] 10000[mg/L]

300[kg-DS/h]X1000[g/kg]+( 1000[mg/L+1000[mg/g])=30m³/h

Treatment volume Unit conversion Sludge concentration Unit conversion Sludge flow rate

●300[kg-DS/h] x 0.3% x 1000 x 1000[g/kg] = 900L/h

Treatment volume Agent addition rate Dilution rate Unit conversion Agent flow rate

●Please slightly larger than the theoretical value when choosing matching equipment, specifications update without advance notice, set Timing please ask for drawings.

Packing

Hot Tags: screw press for water treatment, China, suppliers, manufacturers, factory, cheap, in stock, free sample